|
Built in Silicon Image SiI4726 RAID storage processor takes the load off of the computer CPU!
Affordable, reliable and scalable solution for audio/video editing, small
office/home office and small to medium-sized storage! This 5 drive
enclosure with built in Silicon Image SiI4726 hardware RAID processor is capable of delivering over 230 megabytes per second of input/output
throughput!
- 5-Bays with hot-swappable trays
- Built-in hardware RAID controller supports RAID 0, RAID 1, RAID 10 and JBOD
- Also SATA Port Multiplier compliant - supports software RAID 0, RAID 1, RAID 1+0,
RAID 1+S, RAID 5 and JBOD
- PC and Mac compatible
- Includes 2-port x1 PCI Express card & 1 meter (36 inches+) eSATA cable
 |
|
 |
eSATA connector and
Dual 8cm Cooling Fans |
|
Includes 2-port PCI Express card
& 1 meter eSATA cabled
$49.95 Value! |
RAID Level Modes:
- FAST or Data Striping (RAID 0) — allows the enclosure to performance stripe the drives, to provide maximum throughput to the direct attached PC/Server.
- SAFE or Data Mirroring (RAID 1) — allows the enclosure to automatically copy primary hard drive without any CPU
loading*. The enclosure provides automatic rebuild on device replacement and auto-failover, to eliminate any workflow interruptions.
- SAFE & FAST or Data Striping and Mirroring (RAID 10) — allows the
enclosure to improve data availability beyond RAID 5 or RAID 6 with large SATA drives, due to rebuild vulnerability.
- SAFE & BIG Mode or Drive Spanning and Mirroring — allows for large capacity with protection.
- BIG or Drive Spanning — allows the enclosure to make any two drives (same or different sizes) appear as one large drive to the host, for extra capacity (also called concatenation).
- JBOD or Port Multiplier — this allows the direct attached PC/Server to see
the drives in the enclosure as just a bunch of drives.
Data Protection Features:
-
Automatic-Mirroring (RAID 1 mode)*
-
Self-healing storage (Auto-Rebuild/Hot Spare)*
-
No down time (Automatic-Failover)*
-
Less than 1% Host CPU loading during rebuild*
-
Fast rebuild of 100GB/hour
-
Easy configuration using GUI applet
-
Drive Performance Aggregation (RAID 0)
*SAFE or RAID 1 modes require that the Silicon Image daemon/agent application to be running for automatic rebuild policy operation.
Features:
- Five hot-swappable 3.5" drive trays
- SATA II compliant, 1.5Gb/s and 3Gb/s auto-negotiation
- Built-in SiI4726SATA port multiplier for one cable to host simplicity
- Drive power and drive presence LEDs
- Built-in universal power supply
- Dual 8cm Cooling Fans with Hi/Low Speed Control
- Standards-approved eSATA connector rated at 5,000 insertions
What's Included:
- 5-Bay Aluminum eSATA Hardware RAID Enclosure
- Five hot-swappable 3.5" drive trays
- 1 meter eSATA data cable
- AC Power cord
- Set of mobile rack keys
- PCI Express card
- Driver disk
Specifications:
- Connectors: One eSATA connector
- Compatibility: Compatible with all 3.5" SATA I (Serial ATA
1.5Gb/s) and SATA II (Serial ATA 3Gb/s) Hard Drives
- Cooling: Dual 8cm Cooling Fans with Hi/Low Speed Control
- Power Supply: 100-240 VAC 50/60Hz
- Dimensions: 8.5" x 6.1" x 8.4"
- Weight: 25.0 Lbs
- Warranty: One Year Manufacturers Warranty
System Requirements:
- For included x1 PCI Express SATA Host Card:
- PCI Express-enabled system with an available PCI Express (PCIe) slot
- Windows 2000/XP/Server 2003/Vista
- Mac
Pro or Power Mac G5 Dual-Core
with PCI-e slots and Mac OS X 10.4.x or later
- For computers that do not have PCI Express slots, see these PCI-X and PCI
cards:
- Notebook with ExpressCard slot? See:
|
